Precautions for safe use
In order to use this product correctly and safely, it is essential that you understand the following precautions. This is the first step to keeping yourself and those around you safe when using tools. Do not apply excessive load to the tool. Using any tool forcibly can lead to damage and is very dangerous. Please read the safety precautions and instructions below.
Before use
- For your safety, wear safety glasses.
- Due to the nature of the product, there may be sharp parts such as edges and blades. Please wear gloves when using this product as it may lead to injury.
- Check that there are no cracks or rust on the main body, and if you find any, please do not use it. Rust can cause a decrease in strength and may cause damage.
- If there is any abnormality such as defective or damaged parts or loose rivets, please discontinue use.
- The object may scatter. Please make sure there are no people around before using it.
- Depending on the usage environment and usage, the product may be damaged or its durability may decrease. (Environments affected by humidity, high temperature, and chemicals)
ご 使用 上 の 注意
- Use of this product for purposes other than those listed is extremely dangerous. Please use it according to its intended purpose.
- This is a non-insulated tool. Do not work while the power is on.
- Tools will break if excessive force is applied that causes large deformation. Apply only the minimum amount of force necessary for the job, and be careful not to break or chip the piece.
- Do not use it while twisting it from side to side.
- Avoid getting oil or chemicals on the resin parts.
Handling after use
- To prevent rust, apply oil to the main body, rivets, and other moving parts after use, and repeat opening and closing to let it absorb.
- Wipe off any oil or dirt on the surface with a clean cloth.
- Avoid places where it may fall onto your feet, and keep it out of reach of children.
- When storing the product, avoid high temperatures and humidity, and choose a location that is not exposed to direct sunlight.
- When disposing of it, please follow the disposal method of each local government.
This mark is prohibited
*This is an action that should not be taken.
This mark is mandatory
*This is a must-do action.
This mark is
Warning/Caution/Prohibition
*Red: Danger Orange: Warning Yellow: Caution
- If handled incorrectly, there is an imminent danger of death or serious injury.
- Do not cut live wires. I'll get an electric shock.
The grip on the handle of this tool is not an insulator. Using live wires is extremely dangerous. Be sure to turn off the power and make sure the wires are not energized before use.
- Incorrect handling may result in death or serious injury to the user.
If splinters or cut pieces fly off and get into your eyes, you may suffer blindness or visual impairment, so please take the following precautions.
- Please wear safety glasses during use.
- Do not use it in place of a hammer.
- Do not impact it by hitting it with a hammer.
- Check the direction in which the cut pieces fly and make sure the surrounding area is safe.
- If handled incorrectly, there is a risk only of minor injury to the user and damage to property.
- Do not use if there are any abnormalities such as cracks, chips, wear, or deformation.
- Do not impact it by hitting it with a hammer. It is dangerous as the pieces may fly off.
- Do not cut wires, etc. that exceed your capacity.
- It cannot be pried open with a screwdriver.
- Do not modify the product by heating, processing, etc. This is dangerous as the material may change or its strength may weaken.
Please note that we cannot be held responsible for the results of modifications.
Please read the instructions on the KEIBA TOOL mount carefully before use.
